Crystal structures and topochemical polymerizations of 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes

Highly conjugated monomers, 7,7,8,8-tetrakis(alkoxycarbonyl)quinodimethanes (methoxy (1a), ethoxy (1b), isopropoxy (1c), benzyloxy (1d), chloroethoxy (1e), and bromoethoxy (1f)), were synthesized. Recrystallizations of 1a, 1c, 1e, and 1f yielded two crystal forms (prisms (1a-A) and needles (1a-B), needles (1c-A) and plates (1c-B), prisms (1e-A) and plates (1e-B), and prisms (1f-A) and needles (1f-B)), which have different molecular packing modes by X-ray crystal structure analysis, indicating that the crystals are polymorphic. In the photopolymerizations of these monomer crystals in the solid state, 1a-A, 1e-A, and 1f-A polymerized topochemically to give crystalline polymers. For their thermal polymerizations in the solid state, in addition to 1a-A, 1e-A, and 1f-A, 1e-B and 1f-B polymerized, but polymers formed from the 1e-B and 1f-B were amorphous. The packing of quinodimethane molecules in the crystals was defined by four kinds of parameters, stacking distance (d(s)), the distance between the reacting exomethylene carbon atoms (d(cc)), the angles formed between the stacking axis and longer axis of the monomer molecule (theta(1)), and the shorter axis of the monomer molecule (theta(2)), and then the polymerization reactivity of these quinodimethanes in the solid state was discussed on the basis of these parameters.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献   

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Chelate-forming resins prepared by modification of anion-exchange resins

The properties of some chelate-forming resins prepared from common anion-exchange resins by treatment with reagents bearing chelate-forming and ion-exchange groups have been studied. A resin prepared from the sulphonic acid derivative of dithizone (DzS) was found to be superior to other chelate-forming resins. Resins loaded with DzS, tetraphenylporphinetrisulphonic acid or zincon were stable in 1M sodium chloride. Resins prepared from sulphonazo III, arsenazo III, thiosalicylic acid or p-mercaptobenzenesulphonic acid were found to be unstable when exposed to sodium chloride solution.     

A selective reductive amination of aldehydes by the use of Hantzsch dihydropyridines as reductant

Direct reductive amination of an aldehyde was carried out using a Hantzsch dihydropyridine as the reductant in the presence of a catalytic amount of scandium triflate. The reaction was highly selective towards aldehydes over ketones, and other reducible functional groups did not affect the reaction.     

Rigid-rod polymers with polysiloxane side chains. I. Synthesis and characterization of rigid-rod polyimides with polysiloxane side chains and their compatibility with linear polysiloxanes

Rigid-rod aromatic polyimdies having polydimethylsiloxane side chains were prepared for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The polyimides were obtained by imidizing the polyamide-acids bearing the side chains either thermally or chemically, which were synthesized by reacting 4,4′-diaminobiphenyl-terminated polysiloxane macromonomers with pyromellitic dianhydride in THF. The polyamide-acid films obtained by removing the solvent were soluble in THF, but the polyimides were insoluble in any common solvent. The polyimides showed no melting transition below 350°C on DSC analysis, at which temperature the side chain started decomposing. Although all the polyimides were anisotropic as observed by a polarizing microscope, x-ray diffraction analysis suggested the presence of only limited chain organization. Blends with linear polydimethylsiloxanes were prepared by casting the THF solution containing the polyamide-acid and the polydimethylsiloxane, followed by solvent evaporation and thermal imidization. With relatively longer side chains, the polyimides were proved to be compatibilized with polydimethylsiloxanes. © 1994 John Wiley & Sons, Inc.     

Efficient copper-catalyzed coupling of aryl iodides and thiobenzoic acid

A highly efficient copper-catalyzed coupling reaction of aryl iodides and thiobenzoic acid, using 10 mol % of copper iodide, 20 mol % of 1,10-phenanthroline, and ⁱPr₂NEt in toluene, was developed. This methodology is applicable to a variety of aryl iodides.     

Glycosides of benzyl and salicyl alcohols from Alangium chinense

From the water-soluble fraction of the dried leaves of Alangium chinense, three new glycosides, benzyl alcohol beta-D-glucopyranosyl-(1 --> 2)-[beta-D-xylopyranosyl-(1 --> 6)]-beta-D-glucopyranoside, 2'-O-beta-D-glucopyranosylsalicin, and 2'-O-beta-D-glucopyranosyl-6'-O-beta-D-xylopyranosylsalicin were isolated along with seven known glycosides. The structures of the new compounds were determined by spectroscopic and chemical means.     

AMPHIPHILIC COPOLYMERS AS MEDIA FOR LIGHT-INDUCED ELECTRON TRANSFER-II. ELECTROSTATIC EFFECT ON THE BACK ELECTRON TRANSFER

Abstract— Photosensitized reduction of zwitterionic viologen (SPV) and methyl viologen (MV²⁺) was investigated using an amphiliphilic copolymer having phenanthryl and sulfonate groups (APh) as photosensitizer in aqueous solutions. In the presence of triethanolamine the accumulation of SPV * (photoproduct) was found to be faster than that of MV⁺. This attributed to the electrostatic repulsion between SPV. and anionic segments of APh. Such difference between SPV and MV²⁺ was minimized in the case of the related monomer model. Retardation of the back reaction for the APh-SPV system was also demonstrated by laser photolysis, k _b= 8.7 × 10⁷ M ^-1 s^-1 for the polymer system as compared to k _b= 2.8 × 10⁹ M ^-1 s^-1 for the monomer model system. Strong salt-effects on the yield of the photoreduction and the rate of back reaction confirm the strong electrostatic interaction between the photoproducts and polyanions. This remarkable electrostatic effect of the polyanions was simulated by electrochemical redox reactions by using a graphite electrode coated with APh.     

Preferential Uniplanar Orientation of Cellulose Microfibrils Reinvestigated by the FTIR Technique

A simple detection method to observe the uniplanar orientation behavior of native cellulose microfibrils to the cell wall surface by using Fourier transform infrared (FTIR) spectroscopy in the transmission mode is reported. Four bands at 1372, 1355, 1337, and 1317 cm⁻¹ (the latter two have been mentioned previously by Liang and Marchessault (1960, J. Polym. Sci. 43: 85–100)) were found to be sensitive to such orientation: the two middle bands at 1355 and 1337 cm⁻¹ increase remarkably when the 0.60–61 nm lattice planes lie parallel to the cell wall surfaces. The reverse was true when the 0.53–54 nm lattice planes oriented preferentially. Polarization of the two bands at 1372 and 1355 cm⁻¹ was parallel, while that of the other two bands at lower wavenumbers, i.e., at 1337 and 1317 cm⁻¹, was perpendicular to the molecular axis of cellulose. These bands were assigned to OH-related motion, probably to in-plane OH bending, as reported by Maréchal and Chanzy (2000, J. Mol. Spectrosc. 523: 183–196).